MIL-M-45122(Ora)
until correction has been made or until conformance of product to prescribed
criteria has been demonstrated. To avoid interference with operations, the
contractor will designate a responsible official or officials to whom the
Government inspector will report such instances.
4.2 Inspection provisions. - Applicable quality assurance provisions
common to all fire control instruments as specified in Specification MIL-F-13926
shall apply.
4.2.1 Lot formation. - Unless otherwise specified by the contracting
officer, or his representative, inspection lot sizes and lot formation shall
be in accordance with Standard MIL-STD-105.
4.2.2 Examination. - The classification of defects in tables I, II and
III shall constitute the minimum inspection requirements to be performed prior
to acceptance.
4.2.2.1 All rejected lots shall be screened for all defective character-
istics. After corrections have been made and the Government inspector informed
of the corrected action taken, the lot shall be resubmitted for acceptance in-
spection as outlined in Standard MIL-STD-105.
TABLE I - CLASSIFICATION OF DEFECTS
(Use Inspection Level II, and Sampling Plantable
IV-A of Standard MIL-STD-105)
Major
AQL - 1.5
Reg. Para. Q.A. Para.
Test Method
1.
Elevation Level Vial
3.5.1
4.3.3
Device, special testing
2.
Cross Level Vial
3.5.2
4.3.4
DST
Alinement
DST
4.3.5
3.
3.5.3
4.
Top Surface Socket
3.5.3.1
4.3.5.1
DST
Plumb Travel
3.5.4
4.3.6
5.
DST
6.
Extension
3.6
4.3.7
DST
Torque
4.3.10
7.
DST
3*9
TABLE II - CLASSIFICATION OF DEFECTS
(Use Inspection Level 1, and Sampling plan Table
IV-A of Standard MIL-STD-105)
Major
AQL - 1.0 per cent
Req. Para.
Test Method
Incorrect marking
visual
3.5
Illegible marking
visual
3.5
Minor
AQL - 2.5 per cent
Improper closure of interior
5.3.1.5.1
visual
packages
Inadequate strapping or nailing
5.4.4
visual
5.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business