MIL-M-45122(Ord)
lieu of the 18$ inches referenced in Figure 1. Greaseproofed barrier material.
shall be placed between the mounting surfaces and the plywood base. Plain
washers and lock washers shall be added under the nuts. Unthinned paint shall
be applied on the exposed threads above the nuts. The step bolts, nuts and
washers shall be zinc or cadmium coated.
5.3.1.5.2 Packaging the mount, two instrument lights, box end wrench,
cover and extension assembly.- The mount with equipment items shall be packaged
as specified herein, which is in conformance with the methods listed below of
specification MIL-P-116.
Item
Packagi ng Method
Telescope Mount
I
Socket with mounting hardware and pin
IC-1
Each Instrument light
IA-8
Extension assembly with box end wrench
IC-1
Cover.
IC-5
5.3.1.5.2.1 Mount, socket, hardware and pin.- The mount, socket, hardware
and pin shall be packaged as specified in 5.3.1.5.1.1 to 5.3.1.5.1.5 inclusive,
except as follows:
The bagged socket, hardware and pin shall not be secured
a.
to the mount.
b. The dimension l8 inches in Figure I shall apply.
5.3.1.5.2.2 Instrument lights.- Each instrument light shall be wrapped
with flexible single face corrugated fiberboard conforming to type I of Specifi-
cation LLL-F-291 and secured with gummed tape conforming to class 2 of Specifi-
cation UU-T-111. Each wrapped instrument light shall be placed in a bag con-
forming to type I or II, class e of Specification MIL-B-117. The bag shall be
heat sealed, exhausting entrapped air prior to final closure.
5.3.1.5.2.3 Extension assembly and box end wrench.- The extension assenibly
and box end wrench shall each be wrapped with greaseproofed barrier material.
Each wrap shall be secured in place with pressure sensitive tape. The wrapped
extension assembly and wrapped wrench shall be placed together in a greaseproof-
waterproof bag. The bag shall be heat sealed, exhausting entrapped air prior
to final. closure.
5.3.1.5.2.4 Cover and bagged items immobilized in a fiberboard box.- The
cover and bagged items specified in 5.3.1.5.2.1, 5.3.1.5.2.2 and 5.3.1.5.2.3
sha1l be immobilized in a fiberboard box conforming to class 2 or 3, any com-
pliance symbol and any style except FTC, TS, OPF amd FPF of Specification PPP-B-
636. The inside dimensions of the box shall be I-2. inches by 8. inches by 8.
inches. The fiberboard box shall be closed with pressure sensitive tape
10.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business