INCH-POUND
MIL-DTL-48555B
16 August 2012_
SUPERSEDING
MIL-Q-48555A(AR)
26 November 1989
DETAIL SPECIFICATION
QUADRANT, FIRE CONTROL - M17A1
Reactivated after 16 August 2012 and may be used for new and existing designs and
acquisitions
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers Quadrant, Fire Control: M17A1, which
provides a measure of elevation angles for 155mm towed howitzers. It is equipped with
numerical counters which indicate elevation settings and corrections.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4
of this specification. This section does not include documents in other sections of this
specification or recommended for additional information or as examples. While every
effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all requirements of documents cited in sections 3 and 4 of this
specification, whether or not documents are listed in this section.
Comments, suggestions, or questions on this document should be addressed to:
Commander, US Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey
07806-5000 or emailed to picaardecstdznbranch@conus.army.mil. Since contact
information can change, you may want to verify the currency of this address information
using the ASSIST online database at https://assist.dla.mil.
AMSC N/A
FSC 1290
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business